Loading…
Alfdex
ATRO
Automann
Automann Phoenix
B'laster
Barksdale
Bendix
BF Original
BorgWarner
Bosch
Breeze
Calorstat
Clampco
ConMet
Continental
Cummins
DAVCO
Dayco
Deflecto
Delco Remy
DENSO
Diesel Cast Welding
Doctor PreloadDTBPDTBP
Eco Flaps
Econoride
Elring
Everco HD
EZ Oil Drain Valve
Fersa
FIAMM
Firestone
Four Seasons
Freightliner
Gabriel
Grote
Gunite
GUNK
Haldex
HELLA
Hendrickson
Hengst
Hutch
Interstate
Kit Masters
Link
Littelfuse
Lucas Oil Products
MAHLE
Mallentech
Marathon
Meritor
Michelin
Mitsubishi
Monroe
National
Neapco
Norgren
Permatex
Pex
Phillips
Pollak
Pur-Start
Pur-Stop
RevHD
SACHS
SAF
Sampa
Sanden
Sensata
SKF
Spicer
Spicer Select
Stabilus
STEMCO
The A Blade
Timken
Titeseal
Torca
TRICO
Velvac
Victor Reinz
Volvo
WABCO
Wagner
Walther EMC
WebbHome / Catalog / Wheel Ends / Hubs
ConMet
Part number 10082218
ConMet 10082218 is cataloged as an iron PreSet drive hub. Its listed wheel-stud standout is 3.06 inches, not overall stud length.
Confirm the exact application and configuration before selecting this part. Reference numbers and similar configurations do not guarantee interchange.
| Part number / SKU | 10082218 |
|---|---|
| Brand | ConMet |
| Department | Wheel Ends |
| Part type | Hubs |
| Material | Iron |
| Axle Position | Drive |
| Axle | R |
| Assembly Type | PreSet |
| Bearing Set (Inboard) | SET: 429Conditions / detailsExact PreSet bearing designation; do not substitute conventional bearing sets based on shared numeric dimensions. |
| Bearing Set (Outboard) | SET: 430Conditions / detailsExact PreSet bearing designation; do not substitute conventional bearing sets based on shared numeric dimensions. |
| Compatible Brake Type | Drum |
| Rotor Type | N/A |
| Hub Mounting System | HP10 |
| Axle Stud Thread | 5/8”-11 UNC - R.H.Conditions / detailsLiteral hub-table value. The associated double-ended axle stud 10018442 separately lists both 5/8-18 UNF RH and 5/8-11 UNC RH; do not collapse the two interfaces. |
| Flange Offset | 1.31 inch |
| Brake Drum Pilot | 8.78 inch |
| Barrel Length | Long Barrel: 7.69" - 7.75" |
| ABS TONE RING INCLUDED | YES |
| Wheel Stud Standout | 3.06 inch |
| Wheel Material | Steel WheelsConditions / detailsLiteral app value; no aluminum-wheel application inferred. |
| Weight | 61.7 lb |
| Manufacturer-listed inboard bearing subrows | CUP: 592A PS (PreSet); Cone: 594A PS (PreSet)Conditions / detailsFresh public ConMet exact 10082218 own Product Specs table, captured2026-10-19. Literal named inboard/outboard CUP and CONE subrows only; full PS (PreSet) text retained. Source association to this hub, not a Timken article/brand claim, complete-set/whole-hub cross, bearing capacity, supplied kit BOM/quantity, conventional-to-PreSet conversion or installed fitment approval. Do not drop/add suffixes, substitute bare conventional parts, mix bearing systems or transfer loose-part properties. Match exact installed configuration/current manufacturer instructions; physical stock not inspected and all old claims/holds unchanged. App is not all inclusive and incorrect selection can cause premature failure. Source: https://app.conmet.com/hub/details/10082218. Exact attributed catalogue article context only; not physical-stock inspection, package contents, supplied condition or installation approval. Existing source, identity, revision, material, stock and fitment holds remain. No reciprocal/transitive interchange, counterpart-property transfer or whole-product completion. |
| Manufacturer-listed outboard bearing subrows | CUP: 572 PS (PreSet); Cone: 580 PS (PreSet)Conditions / detailsFresh public ConMet exact 10082218 own Product Specs table, captured2026-10-19. Literal named inboard/outboard CUP and CONE subrows only; full PS (PreSet) text retained. Source association to this hub, not a Timken article/brand claim, complete-set/whole-hub cross, bearing capacity, supplied kit BOM/quantity, conventional-to-PreSet conversion or installed fitment approval. Do not drop/add suffixes, substitute bare conventional parts, mix bearing systems or transfer loose-part properties. Match exact installed configuration/current manufacturer instructions; physical stock not inspected and all old claims/holds unchanged. App is not all inclusive and incorrect selection can cause premature failure. Source: https://app.conmet.com/hub/details/10082218. Exact attributed catalogue article context only; not physical-stock inspection, package contents, supplied condition or installation approval. Existing source, identity, revision, material, stock and fitment holds remain. No reciprocal/transitive interchange, counterpart-property transfer or whole-product completion. |
| Manufacturer service part: PreSet / PreSet Plus Hub Rebuild Kit | 10081729Conditions / detailsExact10082218 own Product Specs service-kit table and own Components service/rebuild context,2026-10-19. Manufacturer-listed component/kit role only, not supplied BOM/quantity, whole-hub or kit interchange, bearing replacement, conversion or same-application variant. Exact source numbers retained; shared service numbers do not make10082217/18/19/21 interchangeable. Match installed configuration/current manufacturer instructions; stock not inspected. All original identity, OEM-reference and maximum-GAWR/fitment holds remain unchanged. Source: https://app.conmet.com/hub/details/10082218. Exact attributed catalogue article context only; not physical-stock inspection, package contents, supplied condition or installation approval. Existing source, identity, revision, material, stock and fitment holds remain. No reciprocal/transitive interchange, counterpart-property transfer or whole-product completion. |
| Manufacturer service part: Inner Bearing | 10041915Conditions / detailsExact10082218 own Product Specs service-kit table and own Components service/rebuild context,2026-10-19. Manufacturer-listed component/kit role only, not supplied BOM/quantity, whole-hub or kit interchange, bearing replacement, conversion or same-application variant. Exact source numbers retained; shared service numbers do not make10082217/18/19/21 interchangeable. Match installed configuration/current manufacturer instructions; stock not inspected. All original identity, OEM-reference and maximum-GAWR/fitment holds remain unchanged. Source: https://app.conmet.com/hub/details/10082218. Exact attributed catalogue article context only; not physical-stock inspection, package contents, supplied condition or installation approval. Existing source, identity, revision, material, stock and fitment holds remain. No reciprocal/transitive interchange, counterpart-property transfer or whole-product completion. |
| Manufacturer service part: Outer Bearing | 10041916Conditions / detailsExact10082218 own Product Specs service-kit table and own Components service/rebuild context,2026-10-19. Manufacturer-listed component/kit role only, not supplied BOM/quantity, whole-hub or kit interchange, bearing replacement, conversion or same-application variant. Exact source numbers retained; shared service numbers do not make10082217/18/19/21 interchangeable. Match installed configuration/current manufacturer instructions; stock not inspected. All original identity, OEM-reference and maximum-GAWR/fitment holds remain unchanged. Source: https://app.conmet.com/hub/details/10082218. Exact attributed catalogue article context only; not physical-stock inspection, package contents, supplied condition or installation approval. Existing source, identity, revision, material, stock and fitment holds remain. No reciprocal/transitive interchange, counterpart-property transfer or whole-product completion. |
| Manufacturer service part: Seal & Spacer | 10081520Conditions / detailsExact10082218 own Product Specs service-kit table and own Components service/rebuild context,2026-10-19. Manufacturer-listed component/kit role only, not supplied BOM/quantity, whole-hub or kit interchange, bearing replacement, conversion or same-application variant. Exact source numbers retained; shared service numbers do not make10082217/18/19/21 interchangeable. Match installed configuration/current manufacturer instructions; stock not inspected. All original identity, OEM-reference and maximum-GAWR/fitment holds remain unchanged. Source: https://app.conmet.com/hub/details/10082218. Exact attributed catalogue article context only; not physical-stock inspection, package contents, supplied condition or installation approval. Existing source, identity, revision, material, stock and fitment holds remain. No reciprocal/transitive interchange, counterpart-property transfer or whole-product completion. |
Need a measurement or technical specification? Ask our parts team before choosing the part.
No verified cross-references listed yet.
Have another part number? Ask us to check it.These source-qualified listings are not a fitment guarantee. Confirm the engine, OE number, installed equipment, mounting/configuration and VIN before selecting a part. Missing years or models have not been verified.
| Make | Model | Years |
|---|---|---|
| Not stated | R drive axle; iron PreSet hub; drum brake; HP10 mounting; long barrel Configuration-level manufacturer data only; no make/model/year/engine fitment is inferred. Configuration comparison, not unconditional interchange: match the exact axle, brake, wheel, mounting system and load requirements. ConMet's hub-piloted installation instructions require sufficient stud length for threads to extend beyond the installed wheel nut. Do not choose the shorter configuration if it cannot meet that requirement. Check the actual wheel/drum stack and nut configuration before selecting longer studs; ConMet gives separate ball-seat limits and warns against studs bottoming inside inner cap nuts. Longer is not a universal fitment rule. 26,000 lb maximum GAWR is the app's normal-dual-wheel condition; single-wheel use requires the applicable ConMet derating chart and axle/wheel manufacturer limits. Original source conditionsR drive axle; iron PreSet hub; drum brake; HP10 mounting; long barrel Configuration-level manufacturer data only; no make/model/year/engine fitment is inferred. Configuration comparison, not unconditional interchange: match the exact axle, brake, wheel, mounting system and load requirements. ConMet's hub-piloted installation instructions require sufficient stud length for threads to extend beyond the installed wheel nut. Do not choose the shorter configuration if it cannot meet that requirement. Check the actual wheel/drum stack and nut configuration before selecting longer studs; ConMet gives separate ball-seat limits and warns against studs bottoming inside inner cap nuts. Longer is not a universal fitment rule. 26,000 lb maximum GAWR is the app's normal-dual-wheel condition; single-wheel use requires the applicable ConMet derating chart and axle/wheel manufacturer limits. | Not stated |
Applications not listed here have not been verified.
Compare the number on your existing part. If you’re unsure, our parts team can help check the match before you order.
These are distinct configurations, not an automatic interchange or fitment guarantee.
| Part number | Configuration | Difference |
|---|---|---|
| 10082219 | ConMet 10082219 | 10082219 is ConMet's stated long-stud version: 3.97-inch wheel-stud standout versus 3.06 inches on 10082218; respective listed weights are 63.1 and 61.7 lb.Selection conditionsConfiguration comparison, not unconditional interchange: match the exact axle, brake, wheel, mounting system and load requirements. ConMet's hub-piloted installation instructions require sufficient stud length for threads to extend beyond the installed wheel nut. Do not choose the shorter configuration if it cannot meet that requirement. Check the actual wheel/drum stack and nut configuration before selecting longer studs; ConMet gives separate ball-seat limits and warns against studs bottoming inside inner cap nuts. Longer is not a universal fitment rule. 26,000 lb maximum GAWR is the app's normal-dual-wheel condition; single-wheel use requires the applicable ConMet derating chart and axle/wheel manufacturer limits. |
Confirm the application, dimensions and installation requirements with our parts team before selecting a different configuration.
No verified documents are listed for this part yet. Saved research PDFs remain drafts and are not attached here.
Ask for product documentationConMet 10082218 is cataloged as an iron PreSet drive hub. Its listed wheel-stud standout is 3.06 inches, not overall stud length.
Manufacturer catalog facts only; no inspection of stocked condition or packaging, vehicle fitment, unconditional replacement, bearing substitution or stud conversion. Existing variants remain separately qualified and unapproved. Every full selected draft qualifier must remain visibly appended to the lead.
Wheel-stud standout is not overall stud length or permission to select longer/shorter studs. Match actual wheel/drum/nut stack and manufacturer installation requirements; no blanket compatibility rule.
Exact attributed catalogue article context only; not physical-stock inspection, package contents, supplied condition or installation approval. Existing source, identity, revision, material, stock and fitment holds remain. No reciprocal/transitive interchange, counterpart-property transfer or whole-product completion.
Online ordering is coming soon. Contact our team about this part; listings do not confirm stock.
Contact us to confirm current availability and shipping options for this part.
More Hubs
