Loading…
Alfdex
ATRO
Automann
Automann Phoenix
B'laster
Barksdale
Bendix
BF Original
BorgWarner
Bosch
Breeze
Calorstat
Clampco
ConMet
Continental
Cummins
DAVCO
Dayco
Deflecto
Delco Remy
DENSO
Diesel Cast Welding
Doctor PreloadDTBPDTBP
Eco Flaps
Econoride
Elring
Everco HD
EZ Oil Drain Valve
Fersa
FIAMM
Firestone
Four Seasons
Freightliner
Gabriel
Grote
Gunite
GUNK
Haldex
HELLA
Hendrickson
Hengst
Hutch
Interstate
Kit Masters
Link
Littelfuse
Lucas Oil Products
MAHLE
Mallentech
Marathon
Meritor
Michelin
Mitsubishi
Monroe
National
Neapco
Norgren
Permatex
Pex
Phillips
Pollak
Pur-Start
Pur-Stop
RevHD
SACHS
SAF
Sampa
Sanden
Sensata
SKF
Spicer
Spicer Select
Stabilus
STEMCO
The A Blade
Timken
Titeseal
Torca
TRICO
Velvac
Victor Reinz
Volvo
WABCO
Wagner
Walther EMC
WebbHome / Catalog / Air Systems / Hoses
Automann
Part number 177.10172
Automann catalogs 177.10172 as a discharge hose with a listed assembly length of 72 inches, Teflon hose with 304SS cover and 1/2-inch hose inside diameter. Its source describes straight female SAE swivel ends; the discrepant end-thread size fields remain unresolved, and no mating-thread or installed-routing approval is asserted.
Confirm the exact application and configuration before selecting this part. Reference numbers and similar configurations do not guarantee interchange.
| Part number / SKU | 177.10172 |
|---|---|
| Brand | Automann |
| Department | Air Systems |
| Part type | Hoses |
| Fitting End Combination | Dual SAE Female SwivelConditions / detailsExact Automann own branded article 177.10172; listed numbers do not establish genuine counterpart identity. Full source Description: 1/2 in. Teflon inner tube with 304 stainless steel outer braid cover Two straight female No. 10 SAE flare swivel fittings 72 in. overall length Maximum working pressure 250 psi Withstands temperatures from -65F to 450F Fitting B size7/18in-14 conflicts with A7/8in-14; both size fields held, no typo repair. Dual No10 SAE description does not resolve thread geometry. 250PSI is maximum working pressure, not burst. Comparison lengths are not installed substitutes; verify end threads/routing before application. Confirm supplied part and installed configuration; no VIN-specific or physical-package approval. |
| Discharge Fitting Type (A) | SAE Straight Female SwivelConditions / detailsExact Automann own branded article 177.10172; listed numbers do not establish genuine counterpart identity. Full source Description: 1/2 in. Teflon inner tube with 304 stainless steel outer braid cover Two straight female No. 10 SAE flare swivel fittings 72 in. overall length Maximum working pressure 250 psi Withstands temperatures from -65F to 450F Fitting B size7/18in-14 conflicts with A7/8in-14; both size fields held, no typo repair. Dual No10 SAE description does not resolve thread geometry. 250PSI is maximum working pressure, not burst. Comparison lengths are not installed substitutes; verify end threads/routing before application. Confirm supplied part and installed configuration; no VIN-specific or physical-package approval. |
| Discharge Fitting Type (B) | SAE Straight Female SwivelConditions / detailsExact Automann own branded article 177.10172; listed numbers do not establish genuine counterpart identity. Full source Description: 1/2 in. Teflon inner tube with 304 stainless steel outer braid cover Two straight female No. 10 SAE flare swivel fittings 72 in. overall length Maximum working pressure 250 psi Withstands temperatures from -65F to 450F Fitting B size7/18in-14 conflicts with A7/8in-14; both size fields held, no typo repair. Dual No10 SAE description does not resolve thread geometry. 250PSI is maximum working pressure, not burst. Comparison lengths are not installed substitutes; verify end threads/routing before application. Confirm supplied part and installed configuration; no VIN-specific or physical-package approval. |
| Assembly Length | 72"Conditions / detailsExact Automann own branded article 177.10172; listed numbers do not establish genuine counterpart identity. Full source Description: 1/2 in. Teflon inner tube with 304 stainless steel outer braid cover Two straight female No. 10 SAE flare swivel fittings 72 in. overall length Maximum working pressure 250 psi Withstands temperatures from -65F to 450F Fitting B size7/18in-14 conflicts with A7/8in-14; both size fields held, no typo repair. Dual No10 SAE description does not resolve thread geometry. 250PSI is maximum working pressure, not burst. Comparison lengths are not installed substitutes; verify end threads/routing before application. Confirm supplied part and installed configuration; no VIN-specific or physical-package approval. |
| Hose Type | Teflon w/304SS CoverConditions / detailsExact Automann own branded article 177.10172; listed numbers do not establish genuine counterpart identity. Full source Description: 1/2 in. Teflon inner tube with 304 stainless steel outer braid cover Two straight female No. 10 SAE flare swivel fittings 72 in. overall length Maximum working pressure 250 psi Withstands temperatures from -65F to 450F Fitting B size7/18in-14 conflicts with A7/8in-14; both size fields held, no typo repair. Dual No10 SAE description does not resolve thread geometry. 250PSI is maximum working pressure, not burst. Comparison lengths are not installed substitutes; verify end threads/routing before application. Confirm supplied part and installed configuration; no VIN-specific or physical-package approval. |
| Hose Size | #8Conditions / detailsExact Automann own branded article 177.10172; listed numbers do not establish genuine counterpart identity. Full source Description: 1/2 in. Teflon inner tube with 304 stainless steel outer braid cover Two straight female No. 10 SAE flare swivel fittings 72 in. overall length Maximum working pressure 250 psi Withstands temperatures from -65F to 450F Fitting B size7/18in-14 conflicts with A7/8in-14; both size fields held, no typo repair. Dual No10 SAE description does not resolve thread geometry. 250PSI is maximum working pressure, not burst. Comparison lengths are not installed substitutes; verify end threads/routing before application. Confirm supplied part and installed configuration; no VIN-specific or physical-package approval. |
| Hose ID | 1/2"Conditions / detailsExact Automann own branded article 177.10172; listed numbers do not establish genuine counterpart identity. Full source Description: 1/2 in. Teflon inner tube with 304 stainless steel outer braid cover Two straight female No. 10 SAE flare swivel fittings 72 in. overall length Maximum working pressure 250 psi Withstands temperatures from -65F to 450F Fitting B size7/18in-14 conflicts with A7/8in-14; both size fields held, no typo repair. Dual No10 SAE description does not resolve thread geometry. 250PSI is maximum working pressure, not burst. Comparison lengths are not installed substitutes; verify end threads/routing before application. Confirm supplied part and installed configuration; no VIN-specific or physical-package approval. |
| Max Working Pressure | 250 PSIConditions / detailsExact Automann own branded article 177.10172; listed numbers do not establish genuine counterpart identity. Full source Description: 1/2 in. Teflon inner tube with 304 stainless steel outer braid cover Two straight female No. 10 SAE flare swivel fittings 72 in. overall length Maximum working pressure 250 psi Withstands temperatures from -65F to 450F Fitting B size7/18in-14 conflicts with A7/8in-14; both size fields held, no typo repair. Dual No10 SAE description does not resolve thread geometry. 250PSI is maximum working pressure, not burst. Comparison lengths are not installed substitutes; verify end threads/routing before application. Confirm supplied part and installed configuration; no VIN-specific or physical-package approval. |
| Min Temp (F) | -65 °FConditions / detailsExact Automann own branded article 177.10172; listed numbers do not establish genuine counterpart identity. Full source Description: 1/2 in. Teflon inner tube with 304 stainless steel outer braid cover Two straight female No. 10 SAE flare swivel fittings 72 in. overall length Maximum working pressure 250 psi Withstands temperatures from -65F to 450F Fitting B size7/18in-14 conflicts with A7/8in-14; both size fields held, no typo repair. Dual No10 SAE description does not resolve thread geometry. 250PSI is maximum working pressure, not burst. Comparison lengths are not installed substitutes; verify end threads/routing before application. Confirm supplied part and installed configuration; no VIN-specific or physical-package approval. |
| Max Temp (°F) | 450 °FConditions / detailsExact Automann own branded article 177.10172; listed numbers do not establish genuine counterpart identity. Full source Description: 1/2 in. Teflon inner tube with 304 stainless steel outer braid cover Two straight female No. 10 SAE flare swivel fittings 72 in. overall length Maximum working pressure 250 psi Withstands temperatures from -65F to 450F Fitting B size7/18in-14 conflicts with A7/8in-14; both size fields held, no typo repair. Dual No10 SAE description does not resolve thread geometry. 250PSI is maximum working pressure, not burst. Comparison lengths are not installed substitutes; verify end threads/routing before application. Confirm supplied part and installed configuration; no VIN-specific or physical-package approval. |
Need a measurement or technical specification? Ask our parts team before choosing the part.
| Brand / reference type | Part number | Notes |
|---|---|---|
| Tramec Sloan | 462272 | manufacturer-listed-cross-reference. Reference conditionsTramec lists the exact website SKU against its own part. Confirm application; no all-brand equivalence or transferred product specifications implied. |
Reference numbers alone do not guarantee fit. Confirm the exact application.
Fitment has not been verified for this listing.
Compare the number on your existing part. If you’re unsure, our parts team can help check the match before you order.
No verified documents are listed for this part yet. Saved research PDFs remain drafts and are not attached here.
Ask for product documentationAutomann catalogs 177.10172 as a discharge hose with a listed assembly length of 72 inches, Teflon hose with 304SS cover and 1/2-inch hose inside diameter. Its source describes straight female SAE swivel ends; the discrepant end-thread size fields remain unresolved, and no mating-thread or installed-routing approval is asserted.
Exact Automann own branded article 177.10172; listed numbers do not establish genuine counterpart identity. Full source Description: 1/2 in. Teflon inner tube with 304 stainless steel outer braid cover Two straight female No. 10 SAE flare swivel fittings 72 in. overall length Maximum working pressure 250 psi Withstands temperatures from -65F to 450F Fitting B size7/18in-14 conflicts with A7/8in-14; both size fields held, no typo repair. Dual No10 SAE description does not resolve thread geometry. 250PSI is maximum working pressure, not burst. Comparison lengths are not installed substitutes; verify end threads/routing before application. Confirm supplied part and installed configuration; no VIN-specific or physical-package approval.
Automann-owned specifications, exact truck/engine/year fitment and variant relationships still require owning-source evidence from the separately paced, read-only Automann research lane.
Not yet reviewed; no Automann claim verified in this dossier.
Fitting B size7/18in-14 conflicts with A7/8in-14; both size fields held, no typo repair. Dual No10 SAE description does not resolve thread geometry. 250PSI is maximum working pressure, not burst. Comparison lengths are not installed substitutes; verify end threads/routing before application.
Independent review and explicit public approval required; all original holds remain.
No source-backed fitment recorded yet; not proof that none exist.
No source-backed variants recorded yet; not proof that none exist.
Independent content review and explicit human approval remain required before public attachment.
Private source-bound description candidate only; independent prose review and explicit root registration required. Saved catalog assertions do not confirm current supplied stock, physical contents, installed fitment or public/human approval.
Online ordering is coming soon. Contact our team about this part; listings do not confirm stock.
Contact us to confirm current availability and shipping options for this part.
More Hoses
